CLASS SPECIFICATION
ENGINEER TECHNICIAN II
DEFINITION OF CLASS:
This is full performance level technical paraprofessional engineering work in
one of the major engineering specialties, e.g., civil, traffic, environmental,
energy, or fire protection. Employees in this class have contacts with engineers,
architects, contractors, consultants, the general public, and related County
personnel to coordinate accomplishment of projects, exchange information, provide
technical advice and/or guidance, and solve problems. An incumbent offers limited
direct service or assistance to the public.
An employee in this class is responsible for performing various duties to support
an engineering program such as: assisting in highway design by performing calculations
and drawing plans, conducting traffic studies and preparing signal or sign and
marking plans, reviewing plans, etc. Incumbents receive work objectives and
deadlines with assignments and independently plan and perform the work, resolving
most conflicts and referring only unusual or unprecedented situations to the
supervisor for assistance. Work is reviewed upon completion to ensure technical
soundness and conformity to standard operating procedures, policies, and objectives.
Guidelines include industry standards and State and County codes and regulations
which are not always completely applicable to the work and may require adaptation
or modification. The complexity of the work of this class is characterized by
assignments which involve a variety of processes and methods and require analysis
of many factors and an understanding of interrelationships among these factors,
as in performance of drainage calculations and property boundary calculations;
performance of engineering computations; and the design of new or modified highways
and storm drains. Efforts of these employees involve treating a variety of engineering
problems, adapting precedent or established procedures as necessary to accomplish
objectives. Typical projects involve consideration of many interrelated factors,
require use of the full range of paraprofessional engineering methods, and involve
working with unusual administrative requirements, such as with federally funded
projects. Work affects the overall design or operation of County engineering
projects such as highway design or construction, storm drainage systems, and
traffic signing and signalization. The work is primarily sedentary and performed
in an office environment; however, exposure to some risks is present when employees
are involved in periodic field visits to construction sites and work zones.
EXAMPLES OF DUTIES: (Illustrative Only)
Common to All Engineering Specialties:
Prepares estimates of workhours, cost and quantities of materials and equipment,
technical specifications, assessments, and special provisions for use in contract
documents for complex projects for design, construction, or related areas where
the full range of paraprofessional engineering methods are required.
Prepares correspondence for signature of senior personnel in response to citizen
inquiries and complaints.
Civil Engineering:
Reviews subdivision development plans and permit applications for complex projects
such as new road and storm drainage construction as well as for grading, paving,
driveways, and sidewalks to ensure conformance to established codes, standards,
regulations, specifications, and design criteria.
Drafts construction drawings for complete complex construction projects for
highways and storm drainage structures which illustrate paving plans, profiles,
and details; storm drain plains and profiles; structure and pipe schedules;
superelevation tables; earthwork summary tables; curve data tables; sediment
control plans and details; and right of way plats/plans.
Prepares technical and material specifications; cost, material, and workhour
estimates; and other contract documentation.
Performs related duties as required.
Traffic Engineering:
Conducts comprehensive and complex traffic surveys and studies to collect data
to be used in major redesign of traffic systems, such as traffic volume, capacity,
origin and destination, vehicular speed, accident reports, and pedestrian counts;
prepares graphs, tables, or maps related to traffic and pedestrian safety, highway
and intersection capacity, highway design and geometrics, and neighborhood traffic
control; develops recommendations and prepares work orders for traffic control
measures such as traffic signals, traffic signs, pavement markings, and changes
in geometric design.
Calculates signal phasing and timing, time space diagrams, and other work related
to traffic signal installation.
Reviews and provides recommendations concerning plans for proposed driveway
openings, entrance markers, and other proposed features which may impede the
safe flow of traffic.
Checks designs, drawings, specifications, and estimates submitted by consultants
and contractors for compliance with established codes, standards, methods, and
procedures.
Performs related duties as required.
Environmental Engineering:
Conducts surveys and investigations of complex environmental systems and operations
such as pollution control facilities or equipment, stormwater management systems,
and solid waste management systems to ensure compliance with established codes,
standards, and design and maintenance criteria.
Reviews stormwater management easements and maintenance covenants for all stormwater
facilities for technical and legal accuracy and records them in the land records.
Performs related duties as required.
Fire Protection Engineering:
Reviews plans for a variety of fire protection systems, some of which involve
new or complex concepts or operating characteristics, such as calculated and
non calculated sprinkler systems and alarm systems for major renovations, complex
additions, and minor new construction of commercial buildings such as hospitals,
restaurants, retail stores or shops, etc., to determine compliance with established
codes, standards, and design criteria.
Maintains records of each assigned project, the code requirements cited for
same, and status logs of all construction projects submitted for review.
Meets with architects, engineers, and construction personnel to provide information
on new as well as established Fire Code requirements.
May participate in acceptance testing of various standard and complex suppression
systems by witnessing tests and determining adequacy of test conditions and
results; records and retains results of tests.
Provides field consultation to lower level personnel to resolve Fire Code design
and/or construction deficiencies.
Reviews and approves plans for installation of underground fuel storage facilities;
witnesses and verifies conditions and results of testing of
underground fuel storage facilities; and initiates and maintains records concerning
tests.
Performs related duties as required.
MINIMUM QUALIFICATIONS:
Experience: Thorough (5 years) experience in an applicable technical field
that has required the application of principles of physical science and mathematics
to the solution of civil, traffic, fire protection or environmental engineering
problems.
Education: Completion of high school or High School Certificate of completion
recognized in the State of Maryland.
Equivalency: An equivalent combination of education and experience may
be substituted.
Knowledge, Skills and Abilities:
Knowledge of complex mathematics, including algebra and geometry, as well as
methods, equipment, and techniques relating to planning, designing, estimating
costs, and monitoring engineering projects where specialized, complicated procedures
must be used.
Knowledge of the County, State, and Federal laws, codes, and regulations pertaining
to the applicable technical field.
Knowledge of procurement regulations, policies and procedures (when position
requires).
Skill in preparing engineering drawings utilizing sketching and drafting techniques,
including computer-aided design.
Ability to read and interpret engineering plans and specifications and to convey
their meaning to others.
Ability to access and manipulate data using computers and engineering software.
Ability to independently plan and coordinate work.
Ability to work with coworkers, contractors, engineers, and County employees
to obtain, clarify, and provide information, and to provide advice or guidance.
LICENSE: Possession of a valid motor vehicle operator's license when required for job-related duties.
PROBATIONARY PERIOD:
Individuals appointed or promoted to a bargaining unit position in this class
will be required to serve a probationary period of six months. Individuals appointed
to a non-bargaining unit position in this class will be required to serve a
probationary period of twelve months, or if promoted to a non-bargaining unit
position, will be required to serve a probationary period of six months. Performance
will be carefully evaluated during the probationary period. Continuation in
this class will be contingent upon successful completion of the probationary
period.
MEDICAL PROTOCOL: Medical History Review
Class Established: December, 1973
Revised: July, 1980
August, 1987
July, 1990
August, 1992(M)
May, 1997
April, 2010
Formerly Titled: Engineer Technician III