Home | Help | Site Map
DEP Home : Air : Asbestos
Find an accredited test laboratory
I have asbestos in my home
Asbestos Do's and Don'ts for the Homeowner
Asbestos Professionals
Hire an Asbestos Inspector
Hire A Corrective-Action Contractor
More Information
Asbestos in Schools
Friable vs. Non-friable Asbestos Materials
Asbestos in the State of Maryland
Asbestos is a mineral fiber that has been used commonly in a variety of building construction materials for insulation and as a fire-retardant. Because of its fiber strength and heat resistant properties, asbestos has been used for a wide range of manufactured goods, mostly in building materials (roofing shingles, ceiling and floor tiles, paper products, and asbestos cement products), friction products (automobile clutch, brake, and transmission parts), heat-resistant fabrics, packaging, gaskets, and coatings.When asbestos-containing materials are damaged or disturbed by repair, remodeling or demolition activities, microscopic fibers become airborne and can be inhaled into the lungs, where they can cause significant health problems.
Return to Top
Exposure to asbestos increases your risk of developing lung disease. That risk is made worse by smoking. In general, the greater the exposure to asbestos, the greater the chance of developing harmful health effects. Disease symptoms may take several years to develop following exposure. If you are concerned about possible exposure, consult a physician who specializes in lung diseases (pulmonologist).Exposure to airborne friable asbestos may result in a potential health risk because persons breathing the air may breathe in asbestos fibers. Continued exposure can increase the amount of fibers that remain in the lung. Fibers embedded in lung tissue over time may cause serious lung diseases including asbestosis, lung cancer, or mesothelioma. Smoking increases the risk of developing illness from asbestos exposure.Three of the major health effects associated with asbestos exposure include:
Most products made today do not contain asbestos. Those few products made which still contain asbestos that could be inhaled are required to be labeled as such. However, until the 1970s, many types of building products and insulation materials used in homes contained asbestos. Common products that might have contained asbestos in the past, and conditions which may release fibers, include:
You can't tell whether a material contains asbestos simply by looking at it, unless it is labeled. If in doubt, treat the material as if it contains asbestos or have it sampled and analyzed by a qualified professional. A professional should take samples for analysis, since a professional knows what to look for, and because there may be an increased health risk if fibers are released. In fact, if done incorrectly, sampling can be more hazardous than leaving the material alone. Taking samples yourself is not recommended. Material that is in good condition and will not be disturbed (by remodeling, for example) should be left alone. Only material that is damaged or will be disturbed should be sampled.
The National Institute for Standards and Technology (NIST) maintains a listing of accredited asbestos laboratories under the National Voluntary Laboratory Accreditation Program (NVLAP). You may call NIST at (301) 975-4016.
The best thing to do is to leave asbestos-containing material that is in good condition alone. If unsure whether or not the material contains asbestos, you may consider hiring a professional asbestos inspector to sample and test the material for you. Before you have your house remodeled, you should find out whether asbestos-containing materials are present. If asbestos-containing material is becoming damaged (i.e., unraveling, frayed, breaking apart) you should immediately isolate the area (keep pets and children away from the area) and refrain from disturbing the material (either by touching it or walking on it). You should then immediately contact an asbestos professional for consultation. It is best to receive an assessment from one firm and any needed abatement from another firm to avoid any conflict of interest. In such a scenario as described above, asbestos-containing material does not necessarily need to be removed, but may rather be repaired by an asbestos professional via encapsulation or enclosure. Removal is often unnecessary.
Do not dust, sweep, or vacuum debris that may contain asbestos. These steps will disturb tiny asbestos fibers and may release them into the air. Remove dust by wet mopping or with a special HEPA vacuum cleaner used by trained asbestos contractors.
Major repairs must be done only by a professional trained in methods for safely handling asbestos.Minor repairs should also be done by professionals since there is always a risk of exposure to fibers when asbestos is disturbed.Doing minor repairs yourself is not recommended since improper handling of asbestos materials can create a hazard where none existed.Removal is usually the most expensive method and, unless required by state or local regulations, should be the last option considered in most situations. This is because removal poses the greatest risk of fiber release. However, removal may be required when remodeling or making major changes to your home that will disturb asbestos material. Also, removal may be called for if asbestos material is damaged extensively and cannot be otherwise repaired. Removal is complex and must be done only by a contractor with special training. Improper removal may actually increase the health risks to you and your family.
Asbestos professionals are trained in handling asbestos material. The type of professional will depend on the type of product and what needs to be done to correct the problem. You may hire a general asbestos contractor or, in some cases, a professional trained to handle specific products containing asbestos.Asbestos professionals can conduct home inspections, take samples of suspected material, assess its condition, and advise about what corrections are needed and who is qualified to make these corrections. Once again, material in good condition need not be sampled unless it is likely to be disturbed. Professional correction or abatement contractors repair or remove asbestos materials.Some firms offer combinations of testing, assessment, and correction. A professional hired to assess the need for corrective action should not be connected with an asbestos-correction firm. It is better to use two different firms so there is no conflict of interest. Services vary from one area to another around the country.The federal government has training courses for asbestos professionals around the country. Some state and local governments also have or require training or certification courses. Ask asbestos professionals to document their completion of federal or state-approved training. Each person performing work in your home should provide proof of training and licensing in asbestos work, such as completion of EPA-approved training. State and local health departments or EPA regional offices may have listings of licensed professionals in your area.If you have a problem that requires the services of asbestos professionals, check their credentials carefully. Hire professionals who are trained, experienced, reputable, and accredited - especially if accreditation is required by state or local laws. Before hiring a professional, ask for references from previous clients. Find out if they were satisfied. Ask whether the professional has handled similar situations. Get cost estimates from several professionals, as the charges for these services can vary.Though private homes are usually not covered by the asbestos regulations that apply to schools and public buildings, professionals should still use procedures described during federal or state-approved training. Homeowners should be alert to the chance of misleading claims by asbestos consultants and contractors. There have been reports of firms incorrectly claiming that asbestos materials in homes must be replaced. In other cases, firms have encouraged unnecessary removals or performed them improperly. Unnecessary removals are a waste of money. Improper removals may actually increase the health risks to you and your family. To guard against this, know what services are available and what procedures and precautions are needed to do the job properly.In addition to general asbestos contractors, you may select a roofing, flooring, or plumbing contractor trained to handle asbestos when it is necessary to remove and replace roofing, flooring, siding, or asbestos-cement pipe that is part of a water system. Normally, roofing and flooring contractors are exempt from state and local licensing requirements because they do not perform any other asbestos-correction work.Asbestos-containing automobile brake pads and linings, clutch facings, and gaskets should be repaired and replaced only by a professional using special protective equipment. Many of these products are now available without asbestos. For more information, read Current Best Practices for Preventing Asbestos Disease Among Brake and Clutch Repair Workers.
To find out whether your state has a training and certification program for asbestos removal contractors, and for information on EPA's asbestos programs, call the EPA at 202-554-1404.For more information on asbestos identification and control activities, contact the Asbestos Coordinator in the EPA regional office for your region, or your state or local health department.For more information on asbestos in other consumer products, call the CPSC Hotline or write to the U.S. Consumer Product Safety Commission, Washington, DC 20207. The CPSC Hotline has information on certain appliances and products, such as the brands and models of hair dryers that contain asbestos. Call CPSC at 1-800-638-CPSC. A teletypewriter (TTY) for the hearing impaired is available at 1-800-638-8270. The Maryland TTY number is 1-800-492-8104.Contact your local American Lung Association for copies of:
http://www.epa.gov/asbestos/pubs/asbestos_in_schools.html
Asbestos siding, shingles, and vinyl asbestos floor tiles are considered to be non-friable asbestos materials as they cannot be easily broken into dust by hand. As non- friable asbestos materials, they are not regulated. They can be removed and handled as normal construction debris. Care should be taken, however, to avoid excessive breakage to these materials.
In Maryland, asbestos concerns are handled by the State of Maryland Department of the Environment (MDE). You may contact MDE’s asbestos program at 410-537-3200. The following is a link to their website: http://www.mde.state.md.us/Programs/Air/Asbestos
MDE’s Asbestos factsheet: http://www.mde.state.md.us/programs/Air/Asbestos/FactsaboutAsbestos/Pages/index.aspx
List of Industrial Hygiene firms that may provide asbestos related services:http://www.mde.state.md.us/assets/document/Air/consultant_list.pdf